Unit Skylights:

Unit Skylights:

Circular - Roof Dome

Mac Circular Roof Domes are supplied with insulated, fibreglass reinforced plastic (FRP) curbs. These curbs are available in various heights. Finishing of these curbs on the interior is optional as they are surfaced with white FRP. Mac Circular Roof Domes are available in two types. The built-up roof type is intended for installation onto tar and gravel roofs. The shingled roof type is identical to the afore-mentioned except that the flange is wider and thus serves as flashing for installation onto shingled roofs. Both types are installed by sealing and securing the flange of the unit to the roof sheathing or decking and then applying the roofing or shingles over the flange.

Mac Circular Roof Domes are available with circular aluminum curbs in place of standard FRP curbs on special orders. 

Additional information

Circular - Wall Dome

Mac Circular Wall Domes are supplied with insulated, fibreglass reinforced plastic (FRP) wall liners, which are custom manufactured to suit the wall thickness of each specific project. This liner is designed to protrude inward approximately 1/4 inch (6.0mm) beyond the surface of the interior wall finish, thereby eliminating the need for a casing. Finishing of the interior circular opening is unnecessary as the liners are surfaced with white FRP. Mac Circular Wall Domes are available in two types. The angle ring type is suitable for walls with an exterior finish of siding or stucco. The flat ring type is suitable for walls with an exterior finish of masonry or brick. Both are supplied with a mounting flange permitting the installer to seal and secure the unit into place before applying the exterior wall finish.

Additional information